Category: Compressed Air and Gas Filters
Product Code: ASME Coded Vessels

Specifications:

Porting to: 16" Flange

Flows to: 37,000 SCFM (63,000 m3/hr)

Design: ASME Code/CRN (Canadian Registration)

Available Options:

High Temperature

High Pressure

All Stainless Construction

 

Typical Applications

 

Coalescing (Oil Removal)

Interceptor (Particulate Removal)

Adsorber (Vapor Removal)

Compressed air system protections

Dryer protection

Paint spray booths

Microelectronics prefiltration

Natural gas systems

Desiccant dryer aftertfilter

Prefilter for coalescer

Systems with high particulate concentration

Particulate protection for non-lubricated systems

Odor removal

Food packaging

Powder paint systems

 

For types C, Q and D... Choose your grade...

Grade 6 filters are used when “total removal of liquid aerosols and suspended fines” is required. Because of its overall performance characteristics, this grade is most often recommended. A grade 6 element is great prefilter protection for desiccant air dryers. This element prevents oil or varnish from coating the desiccant, while maintaining the dryer efficiency.

Grade 8 filters combine high efficiency with high flow rate and long element life. A separate prefilter is not required for "normal to light" particulate loading. A grade 8 element is great prefilter protection for refrigerated air dryers. This element maintains dryer efficiency by preventing coating of coils with oil or varnish.

Grade 10 filters are used as prefilters for grades 6 or 8 to remove gross amounts of liquid aerosols or tenacious aerosols which are difficult to drain. A grade 10 element coupled with media type D is a recommended afterfilter for heat regenerated type dryers. This grade is often referred to as a coarse coalescer.

 

Coalescing Elements (removal of liquids and particulate)

Media type C or Q

Available in grades 6, 8 or 10

Air Flow: Inside to Outside

This coalescing element is composed of an epoxy saturated, borosilicate glass micro-fiber tube. Type Q has a pleated cellulose inner layer as a built-in prefilter. This element is metal retained for added strength, and includes a synthetic fabric layer.

Media type D

Available in grades 6, 8 or 10

Air Flow: Inside to Outside

This type D element is composed of a micro-glass coalescer, just like type C, however it is surrounded by two metal retainers. These metal retainers, coupled with a glass drain layer, make this a robust element designed to handle high temperatures.

Media type 7CVP

Air Flow: Inside to Outside

Finite’s 7CVP media consists of two layers. The outer layer consists of a dense matrix of glass fibers. This coalescing layer provides highly efficient aerosol removal and very low pressure drop. The inner layer effectively traps dirt particles, protecting and extending the life of the outer layer. A metal retainer is used for strength and stability.

This media is used in bulk coalescing applications and when relatively high efficiency and low pressure drop are required.

Type 7CVP elements are great prefilters for refrigerated air dryers. This element maintains dryer efficiency by preventing coating of coils with oil or varnish.

For a high temperature version of this element, specify type 7DVP.

 

Water Separator Element  (removal of bulk liquids)

Media type 100WS

Air Flow: Inside to Outside

This rolled stainless steel mesh element has two metal retainers with rolled mesh steel in between. It is an extremely robust design.

This media is used for the reduction and elimination of excess liquids in gas streams. Excellent prefiltration for coalescing grades 6 and 10 when extreme quantities of liquid contaminants are present.

 

Interceptor Element (removal of particulate)

Media type 3P

Air Flow: Outside to Inside

This particulate element is constructed of pleated cellulose with a 3 micron rating. It is metal retained for added strength and includes an outer synthetic fabric layer.

3P particulate interceptor elements are used where very high dirt holding capacity and relatively fine pore structure are required.

 

Adsorption Element (removal of odor)

Media type A

Air Flow: Outside to Inside

This hydrocarbon vapor removal element consists of an ultrafine grained, highly concentrated, activated carbon sheet media. It is metal retained for added strength and includes an outer synthetic fabric layer.

This media is used to remove hydrocarbon vapor and is safe for breathing air.




Add to Enquiry Cart Print